Vehicle Chassis Testing provides accurate performance and validation testing for two, three and four-wheeled vehicles under controlled conditions.
Product Details
Vehicle Chassis Testing
Chassis Testing
Vehicle Chassis Roller Testing
Vehicle Chassis Testing provides accurate performance, durability, and validation testing for two, three, four and heavy duty vehicles under controlled laboratory conditions. It simulates real-world driving scenarios to evaluate vehicle behavior, safety, and compliance without on-road testing.
End-to-End Expertise
All-in-one software, engineering, automation and testing
Reliable Testing
Precise, dependable testing for critical systems
Future-Ready Innovation
Smart digital manufacturing integration
On time Delivery and Installation Commitment
Timely delivery and installation as per commitment.
World Class Solution with Cost Effective
Global-standard solutions at optimized cost.
Commercial Vehicle Test Equipment
A Chassis Dynamometer by KAPVL is an advanced testing system designed to evaluate dynamic performance, fuel efficiency and emissions by accurately simulating real road conditions through an AC electric dynamometer with full electrical inertia. It reproduces actual or customized driving resistance, complies with national and international standards, interfaces with emission analyzers and can be upgraded to meet diverse global emission and testing requirements.
Chassis Dyno for Commercial Vehicle
- Automatic adjustment of front and rear wheelbase
- Clear operation mode and fast data extraction
- High level torsional stiffness, torque vector test
- Modular test concept, which can match with various demand budget schemes
- Advanced driver assistance system
- Suitable for different types of driver operation
- Easy to service
- 72 Inch (1828.8mm±0.254mm) roller, AC motor, suitable for heavy commercial vehicles
- Moter center
- Quality simulation with high precision and repeatability
- Accuracy higher than EPA requirement
- Extremely compact design
- High dynamic stability
- Configure common emission test system interface
- Automation software module
- Easy system upgrade
- Motor Power: 455 kW / 560 kW / 650 kW
- Roller Size: 72 inches (1828.8 mm)
- Maximum Speed: ≥ 120 km/h
- Reference Inertia: 7200 kg
- Inertia Simulation Range: 3,500 kg to 30,000 kg
- Traction Capacity: Up to 48,000 N
- Measurement Accuracy: ±0.1% (force & inertia)
- Acceleration Accuracy: ± 0.005 m/s²
- Surface & Bearing: Thermal sprayed rollers with three-ring bearings
Light vehicle test equipment
The KAPVL Chassis Dynamometer System is designed to test vehicle power, fuel economy and emissions using a high-performance AC electric dynamometer with full electrical inertia and dual-motor axle control. It accurately simulates real and customized road resistance, complies with national and international standards and supports multiple external interfaces for emission, fuel and energy analyzers, enabling real-time data monitoring and global test cycle operation with upgradeable capabilities for future standards.
Chassis Dyno for Car
- 48 Inch (1219.2mm±0.254mm) roller, AC motor, suitable for light vehicle
- Motor bias
- Quality simulation with high precision and repeatability
- Accuracy higher than EPA requirement
- Simultaneous detection of multiple axes
- Extremely compact design
- High dynamic stability
- Intelligent bearing design (three ring bearing)
- Configure common emission test system interface
- Automation software module
- Easy system upgrade
- Full electric inertia simulation
- Quality simulation with high precision and repeatability
- Clear operation mode and fast data extraction
- High level torsional stiffness, torque vector test
- Modular test concept, which can match with various demand budget schemes
- Advanced driver assistance system
- Suitable for different types of driver operation
- Easy to service
- Axle Configuration: 1 to 4 axle support with dual motors per axle
- Motor Power per Axle: 150 kW ×2 / 220 kW ×2 / 300 kW ×2
- Roller Size: 48 inches (1219.2 mm) per axle
- Maximum Speed: ≥ 200 km/h per axle
- Reference Inertia: 1750 kg per axle
- Traction Force: Up to 25,000 N per axle
- Traction & Speed Control Accuracy: ±0.1% F.S, ±0.03 km/h
- Acceleration & Speed Measurement Accuracy: ±0.005 m/s², ±0.02 km/h
- Heavy-Duty Design: Thermal-sprayed rollers with three-ring bearing structure
Motorcycle test equipment
The Two-Wheeler Electric Vehicle Chassis Dynamometer is designed for accurate power performance testing of electric motorcycles. Using a high-speed control and communication system, it calculates real-time road and vehicle conditions and precisely controls the speed servo system to simulate actual riding conditions, ensuring reliable and repeatable test results.
Chassis Dyno for Two-Wheel Electric Vehicles
- High precision, stable work, safe and reliable
- Clear operation mode, fast data extraction speed
- Extremely compact design
- High dynamic stability
- Automation software module
- Convenient system upgrade
- Simple maintenance
- Good economic benefits
- Electric motorcycle driving range test
- Energy consumption rate test
- Maximum speed test
- Accelerated performance test
- Performance test of fixed slope
- Constant speed climbing test
- Maximum climbing test
- 100km power consumption test
- Overcurrent protection test
- Undervoltage protection test
- Braking distance test
- Maximum speed: 100Km/h
- Maximum driving resistance: 1500N
- Equipment noise: ≤100DB
- Scope of inertia simulation: 100-500kg
- Diameter of the rotating hub: 530mm/762mm
- Width of rotating hub: 300mm/1500mm
- Current accuracy: ±0.2mA
- Current accuracy: ±0.2mA
- Voltage accuracy: ±0.5mV
Our FAQs
Frequently Asked Questions
Find answers to the most common queries about KAPVL’s drivetrain testing, automation and engineering solutions. This section provides clear, concise information to help you understand our services, processes and expertise, allowing you to resolve your doubts quickly and confidently.
We provide complete solutions in drivetrain testing, automation, software development, engineering & turnkey testing systems.
Yes. We design and deliver custom test benches, automation systems and software tailored to specific customer requirements and components.
We specialize in testing Engines, ECV Programming and Development, EV Motors, EV Batteries, E-Axles, Powertrains, Transmission Systems, and other automotive components.
LOTUS is our in-house testing software designed for automation, data acquisition, analysis, AI & ML-based testing and complete test management.
Yes. We offer turnkey end-of-line testing systems including hot/cold test benches, leak testing equipment, waxing systems & conveyor setups.
